- Super Bright & Energy Saving:2 super bright LED light heads with die-casting aluminum material, produce up to 3000lm high brightness output and good heat dissipation. Save your electricity bill by up to 80%. 50,000 hours lifespan .
- Ip65 Waterproof: The IP65 weatherproof rating ensures that your LED motion security light can stand up to the elements. Rain, sleet, or snow, you can rely on the CINOTON security light fixture to provide super bright light!
- Double Motion Sensor & Adjustable Design : Double motion sensor, make a range wide sensing angle up to 180°，360° no corner lighting,max 49ft sensing range. Easy to adjust the light heads and motion sensor to different angle as your requirement.
- Quick and Simple Installation:The installation is very easy, hooking up is a breeze, even for DIY. Just following a few simple wiring steps，this LED outdoor security light can be mounted to a wall.
- 5 Year Warranty – CINOTON’s 5-Year Warranty means we got you covered! Contact us if any issue arises.
Details: Name of a Commodity：CINOTON Infrared sensor
Rated load:MAX.500W resistive load MAX.200W Inductive load
Detection Distance: MAX18m (adjustable)
Detection Motion Speed:0.6-1.5m/s
Working Temperature Power:-10℃–+40℃
Adjust the description:
1.Lite-up（ON TIME）：while three- way-switch put on “ON TIME” position，the light keep lite-up.
2. IR Sensor（AUTO）：while three-way-switch put on AUTO，sens button rotate in clockwise direction to MAX，lux button rotate in clockwise direction to Max, it will work both day and night. If it detective any action, it will lite up the light. And after the action leaving, it will be delay 5s-5min, and then lite off. Lux button rotate in anticlockwise direction to min, during day time, if it detective action, it will trigger the light to flack twice, but not lite up. If it detective action in the night, it will trigger the light lite up. And delay 5s-5min after action leaving and lite off.
3.weak lighting（DIM）: LUX button rotate in anticlockwise direction to min. keep 5-50Lux (20%)at night, and while detective action it will lite up(100%) , and after the action leaving, delay 5s-5min from100% lite up to 20% lite up. When the environment lx is over 30-400Lx ,it will trigger the light lite off. The the delay of weak lighting based the set data(lx and time), and the light will lite off as though it detective any action.
4.D2D mode：lux to be min，while environment lx is 5-50lux, the light will lite up(100%)(lighting detective is not affected by any action.) while the environment lx is35-400lux, lite off. From lite up (100%) to lite off, the delay time is based TIME Set. Lux to be Max, keep lite up, and D2D mode is useless. So under D2D mode, make sure the Lux to be Min Position.
IMPORTANT：Read all safety prec